KT66DL 12 in 1 Multifunction Tester

KT66DL 12 in 1 Multifunction Tester

• User interface: Easy to use single rotary dial with four function softkeys and colour LCD 3.5" dot matrix display.
• ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs. 2 wire only option is very useful in case of no neutral (i.e. 3-phase motor lines & testing at switch points for lighting circuits).
• Loop: High test current range of 2Ω with 00.001Ω resolution.
• Zs Limit: Compares the values required by Electrical Installations Standard (BS7671 - 18th Edition) with measured results.
• 55V Loop: Low and high current loop test of 110V CTE circuits
• RCD: Type AC,A,F,B (General & Selective), EV and Variable RCDs. Single, auto, ramp and contact voltage options. All auto test results displayed on one screen.
• Earth: Earth resistance test 2 and 3 wires option.
• Insulation: Resistance test 100,250,500 & 1000V with auto discharge voltage.
• Continuity: Continuity test at 200mA or 15mA with selectable buzzer for fast judgement.
• Phase rotation: On 3-phase lines with clear indication of the sequence on the display.
• Volts: TRMS Voltage measurements 2-600V, Mains Frequency.
• SPD: Surge Protection Device test, for SPD that uses varistor.
• PAT: Portable Appliance Tester function, for insulation and protective conductor resistance test.
• Advanced memory: Assigns type of test (eg: R2 or R1+R2 for continuity), circuit number and DB to test results.
• Touch voltage: Selectable.
• Documentation: End of line calibration certificate and manual.
• Help: Display shows how to connect the instrument according to the function selected.
• Protection: Supplied in heavy duty soft carry case and the instrument has a lid.
• Safety: IEC 61010-1 CAT IV 300V,CAT III 600 V.IEC 61557-1,2,3,4,5,6,7,10.