Timeguard TS900 Electro-Mechanical 24 Hour Pin Immersion Heater Controller 13A
Product Code: TS900N
Add To Wishlist
In Stock At The Following Branches
Ilford
3 In Stock
Heathrow
2 In Stock
Guildford
2 In Stock
Farnborough
1 In Stock
Kingston
3 In Stock
Rugby
2 In Stock
Cambridge
2 In Stock
Peterborough
1 In Stock
Maidenhead
2 In Stock
Leicester
3 In Stock
The TS900 has been specially designed for installation with both new and existing immersion heater systems. Up to 24 ON & OFF programmes (additional pins required) plus self cancelling override for instant ON/OFF switching.
- For total control of your hot water.
- Switches ON and OFF at preset times.
- Easy to use setting pins.
- 30 minute minimum switching interval which can be increased in 15 minute steps.
- Manual override until next programme change.
- Integral thermal fuse for extra protection.
- Bottom or rear entry for cable.
Note: >TS900 not to be used with fluorescent or low energy lighting. Can be used with filament lighting up to 400W. Cannot be used with discharge lighting (e.g. SON and Metal Halide).
Dimensions:
Width 74mm Height 120mm Depth 48mm
Tech Info:
Timer Mode: 24Hr Setting Type: Pin Operating Voltage: 230V AC Switch Rating 230V AC: 13 amp Resistive (3kW), Inductive 5A Operating Temperature: 0 to 50°C Cable Connection: 1.5 ? 2.5mm2 Flexible Cable Conforms to Directives: 73/23/EEC, 89/336/EEC
| Product | Time Controller |
|---|---|
| Programming | 1 Day |
| Supply Voltage | 230 V |
| Override Facility | Y |
| Length Min Max (mm) | 120 |
| Width (mm) | 74 |
| Depth (mm) | 48 |
| Current Rating | 13 A |
| CE Approved | Y |
| Warranty | 3 Years |
| UK Mainland | Order by 2pm for Next Day Delivery* |
|---|---|
| Under £25.00 | £4.50 |
| Over £25.00 | FREE |
| UK Highlands & Islands | Order by 2pm for Next Day Delivery* |
|---|---|
| Under £80.00 | £15.00 |
| Over £80.00 | FREE |